Konica Minolta Bizhub 215 User Manual
Page 48
bizhub 215
1-43
1.18
Removing a jam
1
Int
ro
duc
ti
on
Chap
ter
1
Removing a paper jam in the main unit, Bypass Tray, or Tray1
The following describes the procedure for removing a paper jam in the main unit, Bypass Tray, or Tray 1.
Tips
-
Areas around the fusing unit are hot. To prevent burns, do not touch any parts other than those speci-
fied in the procedure. If you touch a hot component, immediately cool the skin with cool water and con-
sult a physician.
-
Touching the surface of the transfer roller can deteriorate the image quality of copies. Be careful not to
touch the surface of the transfer roller with your hand.
-
When releasing the pressure-bonding lever, hold the green part of the lever.
-
Touching the surface of the PC drum can deteriorate the image quality of copies. Be careful not to touch
the surface of the PC drum with your hand.