Konica Minolta Bizhub 215 - Manual (Page 57)

Saving paper used for copying 2
2-4 bizhub 215
2.3
Us
ing
as
a C
opy
Ma
ch
ine
Ch
apte
r 2
2.3 Saving paper used for copying
This section describes procedures for printing on both sides of paper (2-sided copying) and for printing mul-
tiple reduced pages onto a single sheet (combined copying).
2-sided copying
When copying a large number of 1-sided originals, copying them onto both sides of each sheet reduces the
amount of paper used by 50%.
The 2-sided copy function is available only when the optional Automatic Duplex Unit AD-509 is installed.
1
Press Copy and load the original.
% For details on how to load the original, refer to page 1-37.
2
Configure the settings for 2-sided copying.
% Use +, to select [1-SIDE
→
2-SIDE], and press OK.
% When you select [1-SIDE
→
2-SIDE] and press ), you can specify the binding position for the print-
ed sheets.
Tips
For [1-SIDE
→
2-SIDE], [1-SIDE] refers to a 1-sided original, and [2-SIDE] refers to a 2-sided copy.
3
Use the Keypad to specify the number of copies, then press Start.
% To interrupt the copy operation being performed, press Clear/Stop. For details, refer to page 2-8.
% When you have loaded the original onto the Original Glass, go to Step 4.
4
When a message appears, load the next original then press OK.
5
When all originals have been scanned, press Start.
Tips
- The number of scanned pages is displayed under the number of copies.