Konica Minolta bizhub 160 - Manual (Page 16)

Installing the TWAIN driver 4
TWAIN Driver 4-1
4 Installing the TWAIN driver
This section describes the procedure for installing the TWAIN driver. The
TWAIN driver can be installed by using plug and play.
2
Note
After the TWAIN driver is installed, the installation of the printer driver be-
gins.
4.1 Installation under Windows XP/Server 2003
Installing the TWAIN driver under Windows XP/Server 2003
1
With Windows running, insert the CD-ROM into your computer’s CD-
ROM drive.
2
Turn on the machine.
3
When the machine is ready, connect it to the computer with the USB
cable.
The “Found New Hardware Wizard” dialog box appears.
When using Windows XP (SP2), select do not connect in the “Found
New Hardware Wizard” dialog box, and then click [Next].
4
Select Install from a list or specific location Advanced , and then
click [Next].
5
Select Include this location in the search: under Search for the best
driver in these locations. , and then click [Browse].
6
Browse to “Driver\(language)\2k_XP” on the CD-ROM, and then click
[OK].
Select the language you prefer. For example, if you prefer English,
browse to:
Driver\English\2k_XP
7
Click [Next].
The “Completing the Found New Hardware Wizard” dialog box ap-
pears.