Konica Minolta bizhub 160 - Manual (Page 20)

Installing the TWAIN driver 4
TWAIN Driver 4-5
4.3 Installation under Windows Me/98 SE
2
Note
When using Windows 98 SE, the USB-compatible device driver must be
installed before the TWAIN driver is installed. Click [Next] after selecting
the following in the dialog box that appears, and then click [CD-ROM
drive].
Display a list of all the drivers in a specific location, so you can select
the driver you want.
Click [Finish] to begin installing the TWAIN driver.
Installing the TWAIN driver under Windows Me/98 SE
1
With Windows running, insert the CD-ROM into your computer’s CD-
ROM drive.
2
Turn on the machine.
3
When the machine is ready, connect it to the computer with the USB
cable.
The “Add New Hardware Wizard” dialog box appears and installation
of the TWAIN driver begins.
4
With Windows Me, select Specify the location of the driver (Ad-
vanced) .
With Windows 98 SE, click [Next], and then select Search for the best
driver for your device. (Recommended) in the dialog box that ap-
pears.
5
Click [Next].
6
Select Specify a location , and then click [Browse…].
7
Browse to “Driver\(language)\Win9x” on the CD-ROM, and then click
[OK].
Select the language you prefer. For example, if you prefer English,
browse to: Driver\English\Win9x
8
Click [Next], and then follow the instructions that appear on the screen
until you can click [Finish].