Konica Minolta bizhub PRO 950 - Manual (Page 29)

3 Installation of the printer driver (Windows) (Easy installation using the installer)
3-2 bizhub PRO 950
3
Read through the License Agree-
ment and click [AGREE].
– Language for the display can be
changed in the pull-down menu
on the lower left side of the win-
dow.
– Windows Vista screens are indi-
cated here for description.
4
Select [Install printers/MFPs] and
click [Next].
[Select Printer/MFP to install] win-
dow appears.
5
Select and install a copier. A copier can be selected by either way of
two as shown below.
– Selection from list detected
When a copier is detected, for in-
stance, the driver name (KONICA
MINOLTA 950 PCL) is displayed
on the screen as shown below.
Then select [Select Printers/
MFPs to Install from the List. You
can select Multiple Printers/
MFPs], turn the check box on the
left of the driver name to ON and
click [Next].
– [Confirm Installation Settings] window is displayed.
– If no copier is detected, If the printer is not detected, turn off this
machine, then on again. When turning off the power, then on again,
wait at least 10 seconds before turning it on again. Otherwise, this
machine may not function properly.