Konica Minolta bizhub PRO 950 - Manual (Page 56)

Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) 4
bizhub PRO 950 4-25
– Clear the “Automatically detect and install my Plug and Play print-
er” check box.
The Select a Printer Port dialog box appears.
6
Click “Create a new port”, and select “Standard TCP/IP Port” for “Type
of port:”.
7
Click the [Next].
– The Add Standard TCP/IP Printer Port Wizard starts.
8
Click the [Next].
9
In the “Printer Name or IP address” box, enter the IP address for this
machine, and then click the [Next].
– If the Additional Port Information Required dialog box appears, go
to step 10.
– If the Finish dialog box appears, go to step 13.
10
Select “Custom”, and then click the [Settings].
11
Change the settings according to the port, and then click the [OK].
– For a Port9100 connection, select “RAW”, and then enter the RAW
port number (9100 at default) in the “Port Number” box.
– For an LPR connection, select “LPR”, and then enter “Print” in the
“Queue name” box.
– The information entered here is case-sensitive.
12
Click the [Next].
13
Click the [Finish].
The Add Printer Wizard appears.