Konica Minolta KIP C7800 - Manual (Page 5)

KIP System Setup & Installation
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP. © 2011 KIP.
- 2 -
Enter Keycodes for Monochrome Copy, Scan and Network
Printing
Once the IP Address has been set the Keycodes for the purchased options need to be entered.
1. From the IPS Graphical User Interface, select the “?” button.
2. Select the “Configuration 2” button
3. Using the Arrow buttons at the bottom scroll to page 2 of 7
4. Select the “Options” button as all check boxes will be blank.
5. Using the onscreen keyboard enter in the
last Keycode in the list of available
keycodes that were provided (not
including the keycode that starts with a $).
6. When all 15 digits have been entered the
“OK” button on the keyboard will become
active.