Konica Minolta KIP C7800 - Manual (Page 7)

KIP System Setup & Installation
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP. © 2011 KIP.
- 4 -
7. Once the keycodes have been
accepted click “OK” and the system
will validate the codes entered and
check all available options.
Note: If color options have been purchased please repeat steps 4, 5 and 6 this time entering the
keycode that starts with the $. Printing Keycodes must be entered FIRST. Only then will the Color
Copy/Scan-to-file Keycodes be accepted.
NOTE
For the KeyCodes to validate the KIP Printer must be fully functional at the time the KeyCodes
are entered. The KIP Printer must have Media installed and connected to the network. There
should be no errors on the printer itself.