Konica Minolta bizhub PRESS 2250P - Manual (Page 125)

Parameter Option Description
Spine
Note: This option is available only when the imposition method is
set to Perfect Bound.
Determines where the signatures are joined at the center fold and
then stitched or bound.
The value that you enter depends on the paper size that you
choose.
Gap Between
Sets
Note: This option is available only when the imposition method is
set to Saddle Stitch or Perfect Bound and the Sets per Sheet
option is set to more than 1.
Controls the gap between sets of saddle-stitch booklets placed on
one sheet.
Bleed ● Extends part or all of the printed image beyond the trimming
boundary.
● Ensures that an inaccurate cutting will not leave undesired white
space at the edge of the page.
● Produces sharp page boundaries with color that extends all the
way to the edge of the page.
The value that you enter depends on the paper size and imposition
method that you choose. You can select Maximum bleed or enter a
Custom bleed size.
Notes:
● You cannot extend the bleed beyond the sheet fold lines. Bleed
does not affect the position of a crop.
● Bleed must be defined in your DTP application in order for the
IC-312m print controller to be able to apply bleed options.
? Enables you to view help on spacing and marks.
Preview Enables you to view your imposition layout and settings. You can
open the Preview window at any time and keep it open to check
your imposition settings as you select them. The Preview window
dynamically reflects any changes that you make.
Imposition tab in the job parameters window 117