Konica Minolta bizhub PRESS 2250P - Manual (Page 136)

Parameter Option Description
Perfect binder
main tray The perfect binder provides the following options:
● Pull Cover from—Enables you to select the tray that contains
the paper on which the cover will be printed
● Cover content
○ Blank/Preprinted—Cover is not printed as part of the job
○ Compose from file (Simplex)— Front and back covers are
part of the file and should be composed and printed on the
outside of the cover sheet
○ Compose from file (Duplex)— Front and back covers are
part of the file and should be composed and printed on the
outside and inside of the cover sheet
○ Print (Simplex)—Front and back covers are included on the
same page in the file and are printed on the outside of the
cover sheet
○ Print (Duplex)—Front and back covers are included on the
same page in the file and are printed on the inside and the
outside of the cover sheet
● Cover orientation—Enables you to select the print orientation
of the cover when cover content is Print (Simplex) or Print
(Duplex)
● Spine
○ Blank—Prints a blank spine
○ From file—Prints the spine content contained on the first
page of the file
● Binding
○ Left
○ Right
○ Top
○ Bottom
Notes: Make sure you follow these actions when you load pre-
printed covers into feed trays:
○ Left Binding— Cover tray, PI1, PI2 ‑‑Load cover face down,
top of cover must point to rear of machine
○ Left Binding—Bypass, Cover tray, PI1, PI2 ‑‑Load cover face
up, top of cover must point to rear of machine
○ Right Binding— Cover tray, PI1, PI2 ‑‑Load cover face down,
top of cover must point to front of machine
○ Right Binding—Bypass, Cover tray, PI1, PI2 ‑‑Load cover
face up, top of cover must point to front of machine
128 Chapter 9—Job parameters