Konica Minolta bizhub PRESS 2250P - Manual (Page 131)

Parameter Option Description
Spot color Spot color Provides the following options:
● Spot library—Applies the CMYK values that are defined in the
spot color dictionaries. You can edit these values using the
Spot Color Editor tool. The spot color dictionaries supported
are: HKS, DIC Color Guide, PANTONE, PANTONE GOE,
PANTONE Plus, and TOYO. See the Spot Color Editor window
for the complete list.
● Original CMYK file values—Uses the CMYK values from your
file.
● When using predefined PANTONE spots—Enables you to
select which PANTONE library to use for your PANTONE
spots. Provides the following options:
○ Use PANTONE Plus library
○ Use legacy PANTONE library
Protect
colors CMYK
Note: If you protect RGB, gray, or CMYK colors, all colors in the
job that include the same color combination as the protected color,
will also be protected.
Provides the following options:
● Preserve black color—Preserves pure black during
transformation.
● Use protected CMYK values—Retains CMYK colors as
defined in the Spot Color Editor.
RGB Use protected RGB values—Retains RGB colors as defined in
the Spot Color Editor.
Gray Use protected gray values—Retains gray colors as defined in the
Spot Color Editor.
Finishing tab in the job parameters window
Apply these settings to specify how to finish your job.
Parameter Option Description
Finishing Lists the available finisher options. This list depends on the modules
that are installed on the printer.
Stapler sub tray ● Multi hole punch—This option is available only if the multi hole
punch module is connected.
● Punch—The values vary according to the type of punch unit
connected. The number of holes is 2, 3, or 4.
Finishing tab in the job parameters window 123