Konica Minolta bizhub PRESS 2250P - Manual (Page 43)

1. Select an RTP job in the IC-312m print controller Storage
area.
2. Right-click the job and select Export for Proofing.
3. Select if you want to export Pages, Booklets or All. If you
selected Pages or Booklets, enter the page or booklet
numbers and/or ranges separated by commas.
Note: If you select an imposed job, you are asked to enter the number
of Sheets instead of the number of Pages.
4. Click OK.
5. In the Export For Proofing dialog box, locate the folder in
which you want to save the file, and click Save.
The PDF file can be printed on any printer.
Verifying the content of the job
When you import a job, the IC-312m print controller automatically
performs a preflight check (in the incoming queue) on the job,
including a check for external components, and displays the
results in the Preflight report window.
The following job components are mandatorily checked:
Note: Fonts and Spot colors are checked only if the preflight run is extended.
● High-resolution images or the incorrect links to the high-
resolution images folder
● Dynamic exception commands for a file that was submitted via
a dynamic page exceptions virtual printer
● AFP resources
Note: The IPDS workflow is available only with the Trans Pack.
If the job passes the preflight check, the Preflight column in the
Storage area displays a green check mark. If the job fails the
preflight check, a red X is displayed.
The preflight report is a job-related report that provides information
about the status (missing or found) of key job components prior to
processing and enables you to correct your files accordingly. You
can review the report and resolve the missing components, and
thus save processing time without error or failed messages
constantly appearing.
If all key components are found in the preflight check, the job is
processed and printed according to the job flow that you selected.
If the test fails (missing key elements are detected), the job is
Verifying the content of the job 35