Using the cli – Avaya P580 User Manual
Page 404
Advertising
9-118
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter
Using the CLI
To configure the PPP console after you have made all the applicable
cable connections with an IP address using the CLI, enter the
following command in Interface mode:
(config if <interface-name>)# ip VLAN {<VLAN-
id>|name <VLAN-name>| Ethernet-Console|Serial-
Console}
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3.1 for details about this
command.
Advertising
This manual is related to the following products: