Adding or deleting interfaces to a zone filter, Adding or deleting interfaces to a zone filter -23, Using the web agent – Avaya P580 User Manual
Page 529
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
15-23
Configuring AppleTalk Routing
Adding or Deleting Interfaces to a Zone Filter
You can add or delete interfaces to a zone filter using either the Web
Agent or the CLI.
Using the Web
Agent
To add or delete interfaces to a zone filter using the Web Agent:
1. Select Zone Filter from the Routing > AppleTalk >
Configuration group on the Web Agent window. The
AppleTalk Zone Filter dialog box opens (Figure 6-134).
2. Select Edit If. The Add/Delete Interface to Zone Filter
dialog box opens (Figure 6-136).
Figure 6-136. Add/Delete Interface to Zone Filter Dialog Box
3. Select the interface to be added from the Add field pull-down
menu.
Or
Click the checkbox in the Select column for the interface
that you want to be remove.
4. Click:
—
Add to add this zone filter to the selected interface.
—
DELETE to remove this zone filter from the selected
interface.
—
CANCEL to restore previous settings.