Konica Minolta Magicolor 3300DN User Manual
Page 104
Advertising
Clearing Media Jams
96
3
Remove the jammed media from the
registration rollers .
Remove any torn pieces of paper still
in the printer .
Attention
Be careful not to touch the transfer
drum while removing jammed
media.
4
If the jam message is still displayed,
remove each media tray.
a
Release the two hooks securing the
chute assembly inside the tray
compartment.
b
Turn the chute assembly 90°
toward the rear of the printer.
c
Remove the jammed media.
d
Close the chute assembly.
e
Repeat for all media trays, if
necessary.
6
Slide the tray(s) back into the printer.
7
Close the front cover.
1
2
Advertising
This manual is related to the following products: