Konica Minolta Magicolor 3300DN - Manual (Page 128)

Status, Error, and Service Messages 120
IMAGING UNIT
LIFE LOW
The imaging unit life is
low. Replace the imaging unit.
The imaging unit will
automatically reset its
consumables count.
IMAGING UNIT
MISSING
The imaging unit is
missing. Make sure that the imag-
ing unit is correctly
installed.
INITIALIZING
The printer is initializing. Wait. No other action
needed.
The printer is warming
up and getting ready to
go on line. Wait. No other action
needed.
INVALID <X> The item <X> is not
valid, such as disk
selected or paper
information.
Make sure you are input-
ting or choosing the valid
information or value.
INVALID ID <X>
The printer has
detected a nongenuine
KONICA MINOLTA
consumable (toner
cartridge, fuser unit, or
imaging unit). To resume printing and to
prevent permanent
damage to your
KONICA MINOLTA
printer, replace the
consumable with
a genuine
KONICA MINOLTA
consumable. If you are
using a genuine
KONICA MINOLTA
consumable and still
receive this error, contact
Support. Refer to the
Service & Support
Guide or check
www.konicaminolta.net/
printer/.
This message... means... do this...