Konica Minolta Magicolor 3300DN - Manual (Page 121)

Solving Problems 113
Colors are
not register-
ing prop-
erly; colors
are mixed
or have
page-to-
page
variation. The color registration
or calibration is not cor-
rect. At setup, and any time the printer is moved,
adjust the side-to-side (scan direction) color
registration. See “Color Registration” on
page 46.
The image
is offset or
slanted. Media is not set prop-
erly in the media
tray(s). Remove the media, tap it to straighten it out,
return it to the media tray, and realign the
media guides.
Unsupported media is
being used. Use KONICA MINOLTA-approved media.
See “Media Sizes and Print Area” on page
19 for a complete
list of approved media. Check
printer.konicaminolta.net/support (click on
Answer Base) for currently approved media.
Media is jammed inside
the printer. Remove any jammed media from the printer.
The printer is not level. Put the printer on a flat, hard, level surface
not to exceed ±5° slant.
The paper path is not
clean. Remove any tape or adhesive that may have
become lodged in the paper path.
Transparency (OHP)
media being fed from
the upper or optional
trays is not feeding cor-
rectly. Try loading about 100 pages of plain paper
first in the tray to give more height to the
transparency stack to reach the feed
rollers.
Symptom Cause Solution