Konica Minolta Magicolor 3300DN - Manual (Page 103)

Clearing Media Jams 95
3
Remove the jammed media by
pulling it toward you.
4
Push both fuser unit levers
completely back.
If the jammed media was not visible
or if you had difficulty removing it,
repeat the instructions in “Near
Imaging Unit” on page 93.
5
Close the front cover.
Media Jam Registration and Mismatch Jams
A registration jam occurs when the media does not pass through the registra-
tion sensor in the registration roller unit below the imaging unit.
A
MISMATCH JAM
may occur if the transparency sensor in the printer
detects the wrong media type.
1
Open the front cover (button A)
, .
2
Locate the registration rollers (one is
black and one is metallic).
A
2
1