Replacing the fuser unit, Warning – Konica Minolta Magicolor 3300DN User Manual
Page 74
Advertising
Replacing the Fuser Unit
66
Replacing the Fuser Unit
WARNING!
The fuser unit is hot and can cause severe burns. When the
printer’s front cover is opened, the fuser unit temperature drops
gradually. Wait one hour after opening the front cover.
How do I replace the fuser unit?
1
Turn the printer off.
2
Open the front cover (button B).
3
Pull up the lever to relieve pressure on
the fuser unit.
4
Open the imaging unit cover .
The fuser fuses the toner onto the media.
Replace the fuser unit (fuser and media feed
rollers) when the control panel displays the
message
REPLACE FUSER UNIT.
B
1
2
1
2
Advertising
This manual is related to the following products: