Konica Minolta bizhub 751 - Manual (Page 16)

Fax Driver 2-4
Installing the fax driver 2
2.2 Automatic installation using the installer
If this installer is used, this machine is automatically detected to determine whether it is connected by USB
or is on the same TCP/IP network as the computer, and the fax driver can be installed at the same time as
the necessary printer driver. The fax driver to be installed can also be manually specified.
2
Note
The installer supports installation in both IPv4/IPv6 environments of Windows Vista/Server 2008/7 only.
Note that it does not support "Secure Printing" (IPPS) in Windows Vista/Server 2008/7 and "Internet
Printing" (IPP) in the IPv6 environment.
2.2.1 Installer operating environment
* With Windows NT 4.0, in order to install a machine that is connected directly to a network using the TCP/IP protocol,
Microsoft TCP/IP Printing Services must first be installed on the computer being used.
2.2.2 Settings of this machine
Specify the IP address of this machine.
2
Note
To allow this machine to be automatically detected when connected to a network, be sure to set the IP
address for this machine before starting installation. For details, refer to the User’s Guide [Network
Administrator].
Depending on the connection method and protocol, change the network settings of this machine.
- Port9100: Enable the RAW port number (9100 at default), on the TCP/IP Setting screen.
- IPP/IPPS: Enable IPP print on the IPP Setting screen.
2
Note
For details on TCP/IP settings and IPP settings of this machine, refer to the User’s Guide [Network
Administrator].
To use IPPS printing, the certificate must be registered to this machine. For details, refer to the User’s
Guide [Network Administrator].
2.2.3 To install the fax driver
2
Reminder
When installing on Windows NT 4.0/2000/XP/Vista/Server 2003, administrator permissions are
required.
If the wizard starts up in order to add new hardware with a USB connection, click [Cancel].
If the User Account Control window appears when installing on Windows Vista/Server 2008/7, click the
[Allow] button or the [Continue] button.
Operating system 32bit editions
Windows NT Workstation 4.0/Server 4.0 (Service Pack 6 or later)*
Windows 2000 Professional/Server (Service Pack 3 or later)
Windows XP Home/Professional (Service Pack 2 or later)
Windows Server 2003 Standard
Windows Vista <All versions>
Windows Server 2008 <All versions>
Windows 7 <All versions>
64bit editions
Windows XP Professional (Service Pack 2 or later)
Windows Server 2003
Windows Vista <All versions>
Windows Server 2008 <All versions>
Windows Server 2008 R2 <All versions>
Windows 7 <All versions>