Konica Minolta bizhub 751 - Manual (Page 29)

Fax Driver 2-17
Installing the fax driver 2
4
When installation is complete, make sure that the icon for the installed printer is displayed in the
"Printers" or "Devices and Printers" window.
2
Note
If the fax driver is not correctly installed, the driver must be updated using "Update Driver ...". For
details, refer to
"Updating the driver after connecting this machine" on page 2-18 .
Installing the fax driver when connecting the machine
In Windows Vista/Server 2008, the fax driver can be installed after you connect this machine.
!
Detail
In Windows 7/Server 2008 R2, a window for specifying the installation disk does not appear after the
machine is connected to the computer. Install the printer driver and connect this machine as described
in "Making the installed fax driver known to the computer".
1
Connect this machine to the computer using a USB cable, and then start the computer.
– When starting up the computer, do not plug in or unplug the cable.
2
Turn on the main power of this machine.
The "Found New Hardware" dialog box appears.
– If the "Found New Hardware" dialog box does not appear, turn this machine off, then on again. In
this case, turn off this machine, and then wait approximately 10 seconds before turning it on again.
If you turn this machine on immediately after turning it off, it may not function correctly.
3
Click "Locate and install driver software (recommended)".
The dialog box requesting the disk (CD-ROM) appears.
– If you do not have the disk (CD-ROM), click "I don't have the disc. Show me other options". On the
next page, select "Browse my computer for driver software (advanced)", and then specify a desired
fax driver folder.
Select a folder according to the printer driver, operating system, and language to be used.
4
Insert the printer driver CD-ROM into the CD-ROM drive of the computer.
The information on the disk is searched for, and then the list of the software supported by this machine
appears.
5
Select the desired fax driver name, and then click [Next].
6
Follow the on-screen instructions.
– If the "User Account Control" window appears, click [Continue].
– If the Verify the publisher dialog box of "Windows Security" appears, click "Install this driver
software anyway".
7
When the installation completes, click [Close].
8
When installation is complete, make sure that the icon for the installed printer is displayed in the
"Printers" window.
9
Remove the CD-ROM from the CD-ROM drive.
This completes the fax driver installation.