Konica Minolta bizhub 751 User Manual
Page 17
Fax Driver
2-5
Installing the fax driver
2
1
Insert the printer driver CD-ROM into the computer’s CD-ROM drive.
–
Check that the installer starts up, and then continue with step 2.
–
If the installer does not start up, open the printer driver folder on the CD-ROM and double-click
"Setup.exe" for the 32bit editions OS and "Setup64.exe" for the 64bit editions OS, and then
proceed to Step 3.
2
Click "Printer Install".
The installation of the printer driver starts.
3
Click the [AGREE] button if you agree with all terms and conditions of the license agreement.
–
If you do not agree with the terms and conditions of the license agreement, the software cannot be
installed.
–
In the language display box, you can change the language used with the installer as required.
4
When the setup selection dialog box appears, click the [Install printers/MFPs] button, and then click the
[Next] button.
The connected printers and copiers are detected.
–
In Windows Vista/Server 2008/7, you can select "Preference for IPv4" or "Preference for IPv6". If
the printer/MFP is detected using both IPv4 and IPv6, the selected address is prioritized.
–
If the printer is not detected, turn the main power off, then on again.
When the turning the power off, then on again, wait at least 10 seconds before turning the power
on again; otherwise, this machine may not function properly.
–
In Windows Vista/Server 2008/7, you cannot set up "Secure Printing" (IPPS connection) using the
installer. To use IPPS connection, use the Add Printer Wizard. For details, refer to
Vista/Server 2008/7" on page 2-11
.