Konica Minolta bizhub 751 - Manual (Page 28)

Fax Driver 2-16
Installing the fax driver 2
2.4 Installing the fax driver using Plug and Play
2.4.1 For Windows XP/Server 2003
1
After using a USB cable to connect this machine to a computer, turn the computer on.
– Do not disconnect or connect the cable while the computer is starting up.
2
Insert the printer driver CD-ROM into the computer’s CD-ROM drive.
3
Turn the main power of this machine on.
The Found New Hardware Wizard dialog box appears.
– When using a USB connection, the local interface kit is required.
– If the Found New Hardware Wizard does not start up, turn the main power off, then on again.
– When turning the power off, then on again, wait at least 10 seconds before turning the power on
again; otherwise, this machine may not function properly.
4
Select "Install from a list or specific location (Advanced)", and then click the [Next] button.
– If the Windows connect to Windows Update dialog box appears, select "NO".
5
From "Search for the best driver in these locations", select "Include this location in the search", and
then click the [Browse] button.
6
Specify the desired folder on the CD-ROM that contains the fax driver, and then click the [Open] button.
– Select the specified folder according to the printer driver to be used, the operating system, and the
language.
7
Click the [Next] button, and then follow the on-screen instructions.
– When the Windows logo test and Digital Signature dialog box appears, click the [Continue Anyway]
or [YES] button.
8
Click the [Finish] button.
9
When installation is complete, make sure that the icon of the installed printer appears in the Printers
and Faxes window.
10
Remove the CD-ROM from the CD-ROM drive.
This completes the fax driver installation.
2.4.2 For Windows Vista/Server 2008/7
Making the installed fax driver known to the computer
To connect this machine to the USB port in Windows Vista/Server 2008/7, install the fax driver before making
it known to the computer with plug and play.
1
Install the fax driver for this machine.
– Install the fax driver using the installer or Add Printer Wizard. To use the Add Printer Wizard, select
the USB port to be connected in "Choose a printer port". For details, refer to
"To install the fax
driver" on page 2-4 , or "Installing the fax driver using the Add Printer Wizard" on page 2-8 .
2
Connect this machine to the computer using a USB cable.
3
Turn on the main power of this machine.
The fax driver for this machine is detected and the machine is ready to print.
– If no fax driver is detected, turn this machine off, then on again. In this case, turn off this machine,
and then wait approximately 10 seconds before turning it on again. If you turn this machine on
immediately after turning it off, it may not function correctly.