Konica Minolta bizhub PRO 1200 - Manual (Page 117)

Chapter 6: Appendix About the network setting of this machine
6-3
1
2
3
4
6
7
5
Appendix
• About the details of settings, refer to User’s Guide (POD Administrator’s
Reference).
6.
Enter the IP Address on
the screen displayed by
touching of [Change]
for [IP Address] and
touch [OK].
7.
Enter the Subnet Mask
on the screen dis-
played by touching of
[Change] for [Subnet
Mask] and touch [OK].
8.
Enter the Default Gate-
way on the screen dis-
played by touching of
[Change] for [Default
Gateway] and touch
[OK].
9.
Set the other setting as required, and touch [OK].
10.
Touch [Exit] to close the Controller NIC Setting screen.
11.
Turn OFF/ON the power of the copier. p.1-2