Konica Minolta bizhub PRO 1200 - Manual (Page 80)

Perfect Binding Chapter 3: Print Operation
3-20
Ex.: When using “Cover Print 2in1” for the perfect binding.
• The use of [PI Tray] and [Perfect Binding Cover Tray] is not available for
“Cover Print 2in1”.
Cover Print 3 in 1
After cutting and pasting automatically the first page of the original on the front cover, the last
page but one (n - 1 page) on the back cover, and the last page (n page) on 3in1 as the spine,
the front cover is printed.
And the second page up to the last page but two (n - 2 page) are printed as the body of doc-
uments.
And it is necessary to set in advance the width of the spine to the paper thickness. The set-
ting can be made in units of 0.1 mm with the setting range between 1 to 30 mm.
Ex.: When using “Cover Print 3in1” for the perfect binding.
• The use of [PI Tray] and [Perfect Binding Cover Tray] is not available for
“Cover Print 3in1”.
Cover Trim
Turn it [ON] when you cut out the cover of Perfect Binding.
Spine Width
A setting is made for the width of Spine.
Cover Duplex
Turn it [ON] when you want to make the cover of Perfect Binding double-sided.
Cover Tray
Select the tray.
Paper Name
Make a selection to decide if complying with the Default Setting or using the name registered
in the information of the Paper Name.
Cover Print 2in1 (Both sides)
n
- 2
Cover Print 3in1 (Both sides)
n-
3