Konica Minolta bizhub PRO 1200 - Manual (Page 18)

Set the Paper to the tray Chapter 1: Preparation for Use
1-8
Loading Paper (Tray 1 and 2)
• Be sure that the machine is powered ON before withdrawing the tray.
• Only one tray can be withdrawn at a time.
1.
Withdraw the tray to be supplied with paper.
2.
Open the feed roller.
3.
Place paper on the tray with any curl turning up, then move
the side guide plates and rear edge guide to the edge of the
paper.
● Load paper with print side face down in the tray aligning it to the
feed roller side of the tray.
Press the lock release lever of the front side guide to move the side
guides, and also move the rear guide to the edge of the paper.
4.
Push in the tray until it locks into place.
● The indicator on the Machine Status Screen or Copy Screen will
change to .