Konica Minolta bizhub PRO 1200 - Manual (Page 108)

Finisher Adjustment Chapter 5: Troubleshooting
5-18
• For details, refer to User’s Guide (POD Administrator’s Reference).
[Paper Width Adjustment] Setting
As an example, this section describes the procedures to adjust the paper width
of the multi folding option (Hole-Punch).
06 Perfect Binder Adjustment 01 Cover Trimming Adj.
02 Cover Lead Edge Adj.
03 Spine Corner form Pos. Adj.
04 Glue Start Position Adj.
05 Glue Finish Position Adj.
06 Glue Form Finish Pos. Adj.
07 Temperature Adj.
08 Sub compile CD Width Adj.
09 Clamp CD Width Adj.
10 Cover Up/Down CD Width Adj.
11 Clamp FD Position Adj.
07 Relay Stacker Adjustment 01 Paper Width Adjustment
02 Paper Length Adjustment
1.
Touch [Adjustment] on the [MACHINE] screen.
2.
Touch [02 Finisher Adjustment].
[Next Page]
Finisher Adjustment