Konica Minolta bizhub C650 - Manual (Page 28)

C650 1-5
Overview 1
Compatible interfaces
The various interfaces that can be used to connect this printing system to a computer are described below.
Ethernet interface
Connect when using this printing system as a network printer.
Supports 10Base-T, 100Base-TX and 1000Base-T. In addition, the Ethernet interface supports the TCP/IP
(LDP/LPR, IPP, SMB), Web Service, IPX/SPX (NetWare), and AppleTalk (EtherTalk).
USB interface
Connect when using this printing system as a network printer.
The USB interface can be connected to a computer running Windows. A USB cable is required for
connection. Use a type A (4 pin, male) or type B (4 pin, male) USB cable. A USB cable measuring 3 meters
or less is recommended.
Connection diagram
The printer cables can be connected to each port at the back of this machine.
Machine (rear view)
Ethernet port
(10Base-T/100Base-
TX/1000Base-T)
USB port