Konica Minolta bizhub C650 - Manual (Page 76)

C650 3-29
Setting up network printing 3
3.9 Printing with Macintosh
This section describes this machine’s settings and the Macintosh network settings.
Specify the printer network port settings after installing the printer driver and when selecting a printer. To
select a printer, refer to "Selecting a printer" on page 2-16.
Operations on this machine
Set the IP address for this machine. For the setting procedure, refer to "Setting the IP address for this
machine" on page 3-3.
Next, specify the AppleTalk or Bonjour settings for this machine as described below.
2
Note
The settings can also be specified from PageScope Web Connection.
Specifying the AppleTalk settings
When connecting this machine to a Macintosh computer using AppleTalk, the AppleTalk settings must be
specified.
1
Press the [Utility/Counter] key in this machine’s control panel, touch [Administrator Settings], and then
enter the administrator password.
– The administrator password is required to enter Administrator mode. Ask the administrator of this
machine for the administrator password.
2
Touch [Network Settings], then [AppleTalk Settings].
3
Specify settings for the following. After specifying the settings, touch [OK].
– AppleTalk Setting: Select [ON].
– Printer Name: Specify the printer name (up to 31 characters).
– Zone Name: Specify the zone being connected to (up to 31 characters).
4
To apply the settings, restart this machine (turn the main power off, then on again).
2
Reminder
When turning the power off, then on again, wait at least 10 seconds before turning the power on again;
otherwise, this machine may not function properly.