Konica Minolta bizhub C650 - Manual (Page 90)

C650 4-12
Various printing methods 4
Center Staple and Fold/Fold
You can specify whether to fold a printed document in half or in three, or to fold a printed document in half
and to saddle stitch it with staples.
2
Reminder
Center Staple and Fold function and Half-fold function are available only when optional finisher FS-608
is installed.
The Tri-fold function is available only when optional finisher FS-608 is installed.
The Z-fold function is available only when the Z folding unit is installed with the optional finisher.
Paper Arrangement
When printing a document with duplex printing, you can specify whether to adjust the binding position with
"Prioritize Arranging Papers", which prints after all the print data is received, or with "Prioritize Productivity",
which prints the data simultaneously as it is received.
Half-fold Tri-fold
Center Staple
and Fold Z-fold
Operating system Printer driver Refer to
Windows Konica Minolta PCL "Specifying the Finish tab settings" on page 5-12
Konica Minolta PostScript "Specifying the Finish tab settings" on page 6-13
Mac OS X PostScript PPD "Layout/Finish" on page 8-11
Mac OS 9.2 "Printer specific options (Finishing Options 1 to 5)" on
page 7-7
Operating system Printer driver Refer to
Windows Konica Minolta PCL "Specifying the Cover Mode tab settings" on
page 5-15
Konica Minolta PostScript "Specifying the Cover Mode tab settings" on
page 6-16
Mac OS X PostScript PPD "Layout/Finish" on page 8-11