Konica Minolta bizhub C754 - Manual (Page 150)

bizhub C754/C654 3-27
3.4 User Box Function 3
<From PageScope Web Connection>
0 For the logon procedure, see page 3-2.
0 Do not leave the machine while you are in the user operation mode. If it is absolutely necessary to leave
the machine, be sure first to log off from the user operation mode.
1
Log on to the user operation mode through User Authentication from the PageScope Web Connection.
2
Click the [Box] tab.
3
Enter the User Box Number and User Box Password of the desired User Box or click the desired User
Box on the box list and enter the User Box Password.
% If a wrong User Box Password is entered, a message that tells that the authentication has failed ap-
pears. Enter the correct User Box Password.
% If the Enhanced Security Mode is set to [ON], entry of a wrong User Box Password is counted as
unauthorized access. If a wrong User Box Password is entered a predetermined number of times
(once to three times) or more set by the administrator of the machine, a message appears that tells
that authentication has not been successful for any subsequent operation for authentication. The
machine is then set into an access lock state.
To cancel the access lock state, the administrator of the machine must perform the Release Setting.
Contact the administrator of the machine.
4
Click [User Box Setting].
% Go to step 6 to change the User Box Password.
% To delete a User Box, click [Delete User Box]. A confirmation message appears. Click [OK] to delete
the specified User Box.