Konica Minolta bizhub C754 - Manual (Page 91)

bizhub C754/C654 2-75
2.15 Setting time/date in machine 2
<From PageScope Web Connection>
0 For the procedure to access the Admin Mode, see page 2-2.
0 Do not leave the machine with the Admin Mode setting screen left shown on the display. If it is abso-
lutely necessary to leave the machine, be sure first to log off from the Admin Mode.
1
Start PageScope Web Connection and access the Admin Mode.
2
Click the [Maintenance] tab.
3
Click [Date/Time Setting] ö [Manual Setting] from the menu.
4
Enter the time-of-day and date and click [OK].
% To correct the time-of-day, use [Time Zone] to set the time difference from the coordinated universal
time (UTC).
5
Check that a message indicating that the setting is completed appears. Then, click [OK].
% To correct the time-of-day using the NTP server, make the following settings.
6
Click [Date/Time Setting] ö [Time Adjustment Setting] from the menu.
7
Click [ON] from the pull-down menu of [Time Adjustment Setting], and make the necessary settings.
% If [Auto Time Adjustment] is set to [ON], the machine connects to the NTP server at regular intervals
to thereby adjust the time-of-day and date. In this case, use [Polling Interval] to set the interval at
which the time/date adjustment is to be made (unit: hours).
8
Click [Adjust].
9
Check that a message indicating that the adjustment is completed appears. Then, click [OK].