Konica Minolta bizhub C754 - Manual (Page 153)

bizhub C754/C654 3-30
3.4 User Box Function 3
3.4.3 Accessing the User Box and User Box file
<From the Control Panel>
0 For the logon procedure, see page 3-2.
0 Do not leave the machine while you are in the user operation mode. If it is absolutely necessary to leave
the machine, be sure first to log off from the user operation mode.
1
Log on to the user operation mode through User Authentication from the control panel.
2
Press the [Menu] key, and touch [User Box].
3
Select the desired User Box and touch [Open].
% To save a new document, select [Save].
4
Enter the User Box Password from the keyboard or keypad.
% Press the [C] key or touch [C] to clear the value entered last.
% Touch [Delete] to delete the last character entered.
% Touch [Shift] to show the upper case/symbol screen.
% Touch [Cancel] to go back to the previous screen.
5
Touch [OK].
% If a wrong User Box Password is entered, a message that tells that the authentication has failed ap-
pears. Enter the correct User Box Password.
% If the Enhanced Security Mode is set to [ON], entry of a wrong User Box Password is counted as
unauthorized access. If a wrong User Box Password is entered a predetermined number of times
(once to three times) or more set by the administrator of the machine, a message appears that tells
that authentication has not been successful for any subsequent operation for authentication. The
machine is then set into an access lock state, rejecting any more logon attempts.
To cancel the access lock state, the administrator of the machine must perform the Release Setting.
Contact the administrator of the machine.