Konica Minolta bizhub C754 - Manual (Page 169)

bizhub C754/C654 4-11
4.1 PageScope Data Administrator 4
4.1.5 Making the account settings
0 For the procedure to access the machine, see steps 1 through 5 of page 4-2.
0 Do not leave the site while you are gaining access to the machine through PageScope Data Adminis-
trator. If it is absolutely necessary to leave the site, be sure first to log off from the PageScope Data
Administrator.
1
Access the machine through [Authentication Settings/Address Settings] mode of PageScope Data Ad-
ministrator.
2
Click the Authentication settings expand button.
3
Click [Account track settings].
4
Select the desired function.
% To register the account, click [Add].
% To change data registered for the account, click [Edit].
% To delete the account, click [Delete]. The following screen appears if the account to be deleted owns
a Group User Box. Select whether to delete the Group User Box or change it to the Public User Box.
% If the boxes are changed to Public User Boxes and if the password set for a particular box before
this change does not meet the Password Rules, no access can be made to the Public User Box, to
which that specific box was changed. In this case, the administrator must first newly set a password
that meets the Password Rules. For details of the Password Rules, see page 1-9.
% If the Account Password does not meet the Password Rules, a message that tells that the entered
Account Password cannot be used appears. Enter the correct Account Password. For details of the
Password Rules, see page 1-9.
% If the Account Name has not been entered, a message appears that tells that the Account Name is
yet to be entered. Click [OK] and enter the Account Name.
% An Account Name that already exists cannot be redundantly registered.
5
Click [OK].
6
Click [Export to the device].
% If you have already logged on to the Administrator Settings via the control panel or using PageScope
Web Connection, the machine displays a message that tells that the write operation has not been
successful because of a device lock error. Click [OK] and wait for some while before attempting to
execute [Export to the device] again.
% If there is a job being executed or a reserved job (timer TX, fax redial waiting, etc.) in the machine,
the machine displays a message that tells that the write operation has not been successful because
of a device lock error. Click [OK] and wait for some while before attempting to execute [Export to
the device] again.