Konica Minolta bizhub C754 - Manual (Page 77)

bizhub C754/C654 2-61
2.12 Protecting Data in the HDD 2
2.12.3 Setting the Overwrite HDD Data
Setting the Overwrite HDD Data function allows data stored in the HDD to be deleted at such timing as the
end of the print cycle by writing specific data over the data that is no longer required. By deleting residual
data that is no longer necessary, data leakage can be prevented from occurring.
The following types of data are subject to the Overwrite HDD Data function:
- Copy, scan, print, or fax job data that is no longer necessary
- PC print job data (direct print, PS print) that is no longer necessary
- Data that is no longer necessary as a result of the data being specified to be deleted
Data stored in the HDD is to be deleted at the following timing:
- At the end (including an end as a result of cancellation) of a copy, scan, print, or fax job performed by
a user who has been authenticated by User Authentication
- A job is deleted by the administrator or a user (who has been authenticated by User Authentication)
- A document in a Box is deleted by the administrator or a user (who has been authenticated by User
Authentication)
- A document is deleted in a Box through Delete User Box
- A document is automatically deleted after the lapse of a predetermined period of time set in the ma-
chine
*
* : The machine offers the following types of automatic box document deleting functions based on a prede-
termined period of time set in it.
<Administrator>
- To be set through [Utility] ö [Administrator Settings] ö [System Settings] ö [User Box Settings] ö
[Document Delete Time Setting].
- To be set through [Utility] ö [Administrator Settings] ö [System Settings] ö [User Box Settings] ö
[Auto Delete Secure Document].
- To be set through [Utility] ö [Administrator Settings] ö [System Settings] ö [User Box Settings] ö [ID
& Print Delete Time].
<User>
- To be set through [Utility] ö [One-Touch/User Box Registration] ö [Create User Box] ö [Public/Per-
sonal User Box] ö [New] ö [Forward] ö [Auto Document Delete Time].
Time to delete documents automatically cannot be set by the user, if [Yes] is set in [Utility] ö [Admin-
istrator Settings] ö [System Settings] ö [User Box Settings] ö [Document Delete Time Setting].
Reference
- If a job being processed is abnormally terminated, the residual data is deleted through Overwrite HDD
Data.
- If the machine is turned off during an Overwrite HDD Data sequence, the Overwrite HDD Data sequence
is resumed automatically after the machine is turned on again.
- If an Overwrite HDD Data sequence being performed is interrupted by, for example, a fault, a response
is detected at 30-sec. intervals and the Overwrite HDD Data sequence, if found interrupted, is resumed
automatically.
0 For the procedure to call the HDD Settings screen on the display, see steps 1 and 2 of page 2-55.
0 Do not leave the machine with the setting screen of Administrator Settings left shown on the display. If
it is absolutely necessary to leave the machine, be sure first to log off from the Administrator Settings.
0 Executing HDD Format erases data in the HDD. It is recommended that important data should be saved
in a backup medium in advance. Execution of HDD Format will also reset the setting values of different
functions to the default values. Set the Enhanced Security Mode to [ON] again. For the functions whose
settings are reset to the default values, see page 2-10.
1
Call the HDD Settings screen on the display from the control panel.