Konica Minolta bizhub C754 - Manual (Page 89)

bizhub C754/C654 2-73
2.15 Setting time/date in machine 2
2.15 Setting time/date in machine
When access to the machine by the administrator of the machine through the Administrator Settings is au-
thenticated, the machine enables setting of the time-of-day and date. Use of the network time protocol (NTP)
server allows the current time/date to be adjusted automatically.
2.15.1 Setting time/date
<From the Control Panel>
0 For the procedure to call the System Settings screen on the display, see steps 1 and 2 of page 2-28.
0 Do not leave the machine with the setting screen of Administrator Settings left shown on the display. If
it is absolutely necessary to leave the machine, be sure first to log off from the Administrator Settings.
1
Call the System Settings screen on the display from the control panel.
2
Touch [Date/Time Settings]
3
Select the item to be set. Then, press the [C] key and next set the time-of-day and date.
Touching [Set Date] lets the NTP server to adjust the current time/date automatically.
% If [Set Date] is to be used for the setting, set the time difference from the coordinated universal time
(UTC) using [Time Zone].
% [Set Date] can be used if the NTP server is registered. For more details, make settings of step 5 and
onward.
4
Touch [OK].