Konica Minolta Konica Minolta 240f - Manual (Page 48)

Power switch and energy save mode 2
2-24 Konica Minolta 240f
2.6
2.6.2 <Energy Save> and Energy save mode
When the machine has been idle for a long period of time, the energy save mode will activate to reduce power
consumption. The energy save mode consists of the "low power mode" and the "sleep mode", which further
reduces power consumption. Use <Energy Save> to activate or cancel the energy save mode.
Low power mode
- When <Energy Save> is pressed, the touch panel display and the various lamps are turned off and the
printer enters a dormant state (the low power mode) to reduce power consumption.
- If the machine is not used for one minute, it will automatically enter the low power mode. This value can
be changed in <Setting> ) [Default Settings] ) [Energy Save Mode] ) [Low Power Mode].
- <Energy Save> illuminates green while the machine is in the low power mode.
- When a key is pressed while in the low power mode, the machine will return to the normal ready state.
Sleep mode setting
- Press and hold <Energy Save> for three seconds to make the machine enter the sleep mode.
- If the machine is not used for one minute in the low power mode, it will automatically enter the sleep
mode. This value can be changed in <Setting> ) [Default Settings] ) [Energy Save Mode] ) [Sleep
Mode].
- When in the sleep mode, all power is turned OFF, but documents scanned into memory can be
transmitted and received documents can be printed.
(The number of rings becomes more than the set number when the machine is in the low power mode.)
- <Energy Save> illuminates red while the machine is in the sleep mode.
- When <Energy Save> is pressed while in the sleep mode, the machine will return to the normal ready
state.
d
The energy save mode does not activate when all the paper has run out, a printing error such as a paper jam
has occurred, or when paper in the bypass tray runs out while performing bypass copying.
The time to cancel or start the energy save mode can be set. For details, refer to Chapter 2, "Setting the
Default Values" in the User's Guide Administrator Operations.
When you are using the machine while logged in, the machine does not enter the sleep mode. Also, the
<Login> button does not go out when the machine is in the low power mode. The <Personal Mode> button
does not go out when using the machine with personal settings.