Konica Minolta Konica Minolta 240f - Manual (Page 15)

Konica Minolta 240f 1-9
1.3 How to read this manual 1
1.3 How to read this manual
1.3.1 Symbols
Operational and safety information
In this manual, the following symbols are used with the items where important operational and safety
information must be observed.
Please note that we will not be held responsible for any loss including pure economic loss that occurs due to
the machine missing an opportunity to perform transmission or recording of data, caused by damage to the
machine, a malfunction, or external factors such as a power failure.
Terms, symbols, and abbreviations
The following terms, symbols and abbreviations are used in this manual.
Symbol Meaning
7 WARNING Describes warnings to protect yourself and others from serious or potentially fatal
injury if you handle the machine incorrectly. For safe operation, please follow in-
structions carefully.
7 CAUTION Describes cautions to protect yourself and others from personal injury or damage
to properties if you handle the machine incorrectly. For safe operation, please fol-
low instructions carefully.
d Describes reference information and additional notes for operations.
Symbol,Terms Meaning
Document Original(s) that you are copying, faxing or scanning.
Paper Paper to be printed on.
Tx Denotes sending.
Rx Denotes receiving.
ADF Denotes Auto Document Feeder.
v Shows the direction of the document.
w Shows the direction of the paper.