Konica Minolta Konica Minolta 240f - Manual (Page 43)

Konica Minolta 240f 2-19
2.5 Connection and main settings 2
2.5.8 Specifying the network settings
You can automatically or manually set the IP address of the machine.
d
If you set the IP address described below, you can operate the machine from the Web browser on a
computer. Connect to the machine from a Web browser to specify the required network settings and e-mail
settings, etc. For details, refer to Chapter 3, "Setting the Connection Environment" in the User’s Guide
Message Board Operations.
Automatically setting the IP address
If DHCP (Dynamic Host Configuration Protocol) server is enabled, an IP address is automatically assigned to
the machine.
A gateway address and DNS server address will also be assigned if they are set on the DHCP server.
d
The IP address and subnet mask assigned by the DHCP server cannot be changed.
1
Press <Setting>.
2
Press [Management].
3
If an administrator password is set, enter the password and press [Enter].
% If an administrator password is not set, proceed to step 4.
4
Press [Network Settings].
5
Press [TCP/IP Settings].
6
Press [Obtain IP address].