Konica Minolta Konica Minolta 240f - Manual (Page 55)

Konica Minolta 240f 2-31
2.8 Loading documents 2
4
Select the paper size, and press [Enter].
2.8 Loading documents
Be sure to read the following guidelines before you begin faxing, copying or scanning.
2.8.1 Acceptable documents
Auto document feeder (ADF)
*1 Real time transmission with super-fine resolution, 216 e 356mm.
Document glass
2.8.2 Items to avoid
The following documents cannot be loaded into the Auto document feeder (ADF). Use the document glass.
- Torn documents or those with holes
- Extremely wrinkled or curled documents
- Documents which are moistened, or stuck with static electricity
- Documents with carbon on the back or no-carbon documents
- Cloth, metal sheets
- Documents with staples, paper clips, or adhesive tape attached
- Documents pasted or glued together
- Glossy documents or documents with a special coating
If you load the following types of documents on the document glass, the glass surface could be damaged or
cracked.
- Do not strongly press down a document when copying a thick document.
- When a hard object is used as a document, load it carefully on the document glass.
- Sharp protrusions could scratch the glass surface.
Single-sheet Multiple-sheet
Size
(Width e Length) Max. : 216 e 900 mm
*1
Min. : 120 e 100 mm
Max. : 216 e 356 mm
Min. : 216 e 139.5 mm
Quantity 1 sheet Max. 80 sheets of A4, F4, A5 v,
Letter, Legal, Half-letter v
(75 g/m
2 or 20lb. paper)
Weight 35.0 to 128.0 g/m
2
52.0 to 105.0 g/m
2
Thickness 0.05 to 0.15 mm 0.07 to 0.12 mm
Document type Plain paper Plain paper
Size
(Width e Length) Max. : 216 e 356 mm
Min. : Unlimited
Quantity 1 sheet
Thickness When using the platen cover: Max 28 mm