Konica Minolta Konica Minolta 240f - Manual (Page 57)

Konica Minolta 240f 2-33
2.8 Loading documents 2
2.8.5 Loading the document on the document glass
1
Make sure that documents are not loaded in the Auto document feeder (ADF).
2
Lift up the platen cover.
3
Place the document face down. Align the top edge of the document with the back edge of the
document glass (by the arrow in the top left corner).
4
Gently close the platen cover.
6 CAUTION
- When copying a bound document, such as a book, the copied image may contain some black areas.
To reduce this effect, hold down the document to prevent its bound part from rising. However, do not
press too strongly. This may break the document glass and cause an injury.
d
Be sure any correction fluid, ink, or stamps on the document are completely dry before loading.
Be sure that the ADF is empty. If a document has been left in the ADF, the scanner glass cannot be used.
When you load a thick document, do not force the platen cover closed. Doing so may cause a malfunction.
When the cover is open or slightly open while copying, try not look at the light.
When scanning is complete, remove the documents from the document glass.