Konica Minolta bizhub 360 - Manual (Page 68)

Administrator Operations 2
360 2-49
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
5
Enter the new 8-digit Administrator Password from the keyboard and
keypad.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the Security Setting screen.
6
Touch [OK].
? What happens if the Administrator Password entered does not
meet the requirements of Password Rules?
% If the Administrator Password entered does not comply with the
Password Rules, a message appears that tells that the Administra-
tor Password entered cannot be used. Enter the correct Adminis-
trator Password. For details of Password Rules, see “Password
Rules” on page 1-11.
7
To prevent entry of a wrong Administrator Password, enter the new 8-
digit Administrator Password once again.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the Security Setting screen.
360_security_E.book 49 ページ ２００７年３月７日 水曜日 午後２時５０分