1 setting the hdd lock password, Setting can be made only from the control panel – Konica Minolta bizhub 360 User Manual

Page 71

Advertising
background image

2

Administrator Operations

2-52

360

Ad

minist

ra

to

r Op

er

at

ions

Chapter 2

When the Encryption Key (encryption word) is set with the optional Secu-
rity Kit SC-502 mounted on the machine, the encryption strength can be
selected from among [Encryption Priority] or [Overwrite Priority]. For
more details, see “Setting the Encryption Key (encryption word)” on
page 2-58.

2.10.1 Setting the HDD Lock Password

2

Note

When the main power switch is turned off, then on again, wait at least 10
seconds to turn it on after turning it off. if there is no wait period between
turning the main power switch off, then on again, the machine may not
function properly.
Here is the sequence, through which the main power switch and sub
power switch are turned on and off:
Turn off the sub power switch

Turn off the main power switch

Turn

on the main power switch

Turn on the sub power switch

Do not leave the machine with the Administrator Setting mode setting
screen left shown on the display. If it is absolutely necessary to leave the
machine, be sure first to log off from the Administrator Setting mode.

<Setting can be made only from the control panel>

0

For the procedure to call the Security Setting menu to the display, see
steps 1 and 2 of “Setting the Enhanced Security mode” on page 2-11.

1

Call the Security Setting to the screen from the control panel.

2

Touch [HDD Setting].

360_security_E.book 52 ページ 2007年3月7日 水曜日 午後2時50分

Advertising