Konica Minolta bizhub 160 - Manual (Page 129)

6 6.7 When the Message “PAPER SIZE ERROR” Appears
6-24 bizhub 160
W
h
e
n
a Mes
s
age Ap
pear
s
Ch
apt
er
6
For the Bypass Tray
1 Remove all paper from the Bypass
Tray.
2 Load the desired paper into the
tray.
3 Select the setting for the type and
size of paper that is loaded.
❍ “Specifying the Size and Type
of Manually Fed Paper” on
page 4-5
4 Try performing the copy cycle again.
HL HL LG