Konica Minolta bizhub 160 - Manual (Page 66)

4.1 Making a Basic Copy 4
bizhub 160 4-3
Ma
ki
ng Copi
es
Ch
apte
r 4
4 Specify the image density.
❍ “Adjusting the Image Density”
on page 4-12
5 Using the 10-Key Pad, enter the
number of copies to be made. Any
number from 1 to 99 can be
entered.
6 Press the [Start] key.
This will start the copy cycle.
❍ To stop the copy cycle in mid-
operation, press the [Stop]
key.
❍ To cancel the copy job, press
the [No/C] key or the [Panel
Reset] key.
❍ To restart the copy cycle,
press the [Start] key.