Positioning a sheet original, Positioning a sheet original -27 – Konica Minolta bizhub 160 User Manual
Page 58
Advertising
3.8 Loading Originals
3
bizhub 160
3-27
B
e
fo
re
Ma
ki
ng
C
o
pi
es
Chap
ter
3
Positioning a Sheet Original
Use the following procedure to position plain paper or an original that is not suitable
for use in the Automatic Document Feeder.
1
Raise the Automatic Document Feeder or Original Cover.
2
Place the original face down on
the Original Glass.
3
Position the original on the
Original Glass so that the corner of
the original aligns with the arrow in
the upper-left corner of the
Original Scales.
4
Gently lower the Automatic Document Feeder or Original Cover.
5
Specify the desired copy settings.
❍
6
Press the [Start] key to start the copy cycle.
Advertising