Positioning highly transparent originals, Positioning highly transparent originals -28 – Konica Minolta bizhub 160 User Manual
Page 59
Advertising
3
3.8 Loading Originals
3-28
bizhub 160
B
e
fo
re
Ma
ki
ng
C
o
pi
es
Chap
ter
3
Positioning Highly Transparent Originals
When making a copy from OHP transparencies, translucent paper, or other highly
transparent original, position the original as detailed below.
1
Raise the Automatic Document Feeder or Original Cover.
2
Place the original face down on
the Original Glass.
3
Position the original on the
Original Glass so that the corner of
the original aligns with the arrow in
the upper-left corner of the
Original Scales.
4
Place a blank sheet of paper of the
same size over the original.
5
Gently lower the Automatic Document Feeder or Original Cover.
6
Specify the desired copy settings.
❍
7
Press the [Start] key to start the copy cycle.
Advertising