Konica Minolta Di351f User Manual
Page 24
Advertising
2
Copying functions (selection)
2-10
Di251f/Di351f
2-Point Staple
(Only available if the FN-109 finisher is installed.)
1
Make sure not to exceed the
maximum staple capacity.
2
Make sure the originals are
loaded correctly.
3
Press [FINISHING] in the Basics
menu.
The Finishing settings are shown.
4
Press [2-POINT STAPLE].
5
Press the [SELECT POSITION]
key.
The display will change.
A
2-point staple
Advertising
This manual is related to the following products: