Konica Minolta Di351f - Manual (Page 9)

Introduction 1
Di251f/Di351f 1-7
Filling the 2nd paper drawer
This paper drawer is designed to hold one paper size.
This drawer can be modified by a technical representative to hold a
different paper size.
1 Carefully pull the paper drawer out
as far as it will go.
2 Press the paper lifting plate down
until it locks.
3 Position the paper between the
paper size guides. The side that is
to be printed must be up.
4 Ensure that the maximum paper
filling height is not exceeded (see
mark on inside of the paper drawer).
5 Close the paper drawer carefully.
Feed roller