Konica Minolta Di351f - Manual (Page 10)

1 Introduction
1-8 Di251f/Di351f
Placing paper in the single-document feed tray
Use the single document feed tray to feed individual sheets into the
system, such as special paper.
1 Load the original into the document feeder. If necessary, make
additional settings.
2 Lower the single feed tray.
3 Set the guide plates for the paper
width.
4 Lay the sheet of paper directly into
the feed tray. The side that is to be
printed must be down.
5 Specify the paper size and the
paper type.
6 Start a copy cycle by touching
[START]. A print or fax cycle will
start automatically.